Showing posts with label A66EAK. Show all posts
Showing posts with label A66EAK. Show all posts

Monday, 19 November 2012

Regrets... I've had a few!

I was looking through my jumbo folder of SCART Hunter resources and found some photos of a lovely little number that I had in my possession for a brief time. I found this Blaupunkt on the nature strip during an epic hard rubbish hunt. Same chassis type as my other Blaupunkts (Grundig CUC 5630) but with a smaller screen. Looking back, it was pretty foolish to get rid of this little ripper! The improved focus and definition of a smaller tube is quite noticeable compared to the larger A66EAK tubes that are in most of the TVs I've still got.

Back when my TV collection numbered 25+, something drastic had to happen and so this little Blaupunkt was one of the first to go in the effort to reclaim some living space. When I made that call I had no idea that I'd come to think that analog chassis TVs were the ultimate way to go. In fact, I can remember thinking this TV was useless because it had no service menu to adjust the geometry! Foolish! Oh well... live and learn!

Front
Back
SCART port
Blaupunkt IS 63-33 VT (chassis FM 310.32)
Final Fight
Golden Axe
Metal Slug
Street Fighter II
Rainbow Islands

Sunday, 10 June 2012

Another purge...

Finally made some time to cleanse my work room of some the debris that had been building up in the there over the last couple months. I was sad to see some of it go (you never know when you'll need some multicolored interconnect...) but, overall, it felt good to purge. Was getting chaotic in there!

Tubes, chassis and wires!
I actually "necked" a yoke-free Philips A66EAK while pulling stuff out of the car at the rubbish dump. Was a little frightening as there was a crazy rush of gas when the glass tubing broke. Quite dramatic! Luckily it wasn't a tube of value...

The unhappy ending for discarded TVs...
In other news, I got around to trying out a tiny Sanyo I found on the side of the street a while back. I couldn't get an image using my home-made VGA to SCART cable but it fired up just fine using my new Arcade Forge UMSA. Looks pretty nice actually!

Tiny Sanyo (Pulstar on screen)


Saturday, 7 April 2012

The almighty Calida 5072

I have a love/hate relationship with the Loewe E3000 chassis. On one hand, the image is excellent: Loewes are well built and use quality components. On the other hand, they're so fickle: geometry distortion when below 60 Hz, missing vertical lines with 256 line games, etc.

I've persisted with the E3000 because it's just so hard to beat the look of a black matrix Philips tube hooked up to this chassis. My advice to MAME users: if you're a CPS1/2/3 and Neo Geo fanatic (and enjoy other 224 line games by Sega, et al), this is the chassis for you!

Observe the sharp focus and rich colours:

Street Fighter III 2nd Impact
The Last Blade 2
Rolling Thunder
Bubble Bobble
The image is crazy sharp, right to the edges! If you like a modern, clean image, this is about as good as it gets. Personally, I have a leaning towards the older, slightly milky look of analog chassis. There's just something about that type of image that is a little more "classic" and truer to the look of arcade monitors of '90s.

The Loewe Calidas also have great aesthetics:

Front... Lovely, simply styling!

You may or may not notice a slight anomaly with the geometry in the picture above... compare the left and right edges...

Philips A68ESF002X111
The tube A68ESF tube is slightly larger than those in my collection of A66EAK tubes. Also, it's flatter. The glass is high gloss and the blacks are BLACK! I love the look of these tubes! Colours are very rich and the contrast is excellent.

Calida 5027 (E3000 chassis, Super Flatline tube)
The Calida 5072 has proven to be quite rare in my experience. The later 80 - 84cm models are more common but feature shitty 100 Hz processing chassis types. Rubbish compared with the E3000! The larger tubes aren't as flat as the A68ESF either.

This particular specimen was dream come true: excellent condition and at a reasonable price. The internals look pretty much immaculate after a blast from the trusty air compressor:

Back cover removed
Overall, an excellent candidate for GroovyMAME usage (provided you don't care for Mortal Kombat or R-Type). My personal feeling is that the Philips A66EAK tends to have better geometry than the A68ESF. I could be wrong, but my experience with the ESF has been that there are always slight imperfections whereas I've seen EAKs that are dead on. That said, if size matters, go for the A68!

If you like what you see here, keep an eye out for the Loewe CT1170 or Contur 1470. Both feature the E3000 chassis and A66EAK tube type. A little easy to find than the Calida 5072 in my experience...