Monday, 21 July 2014

How to clean a 14 inch CRT, inside and out

I like my favorite things to be clean. When I find a new SCART television that I like, I try to restore the aesthetic condition to a new-ish state. Usually this just involves wiping down the outside casing and polishing the screen until I can no longer find a single greasy mark or hardened piece of fly vomit.

However, I've recently taken this cleanliness to the next level by messing around with rinsing the internal components. So far this has proven extremely effective in eliminating the chassis grime that builds up over years of domestic use and neglect.

I guess you could argue that cleaning a chassis makes it easier to service and allows components to cool properly because they’re no longer under a blanket of fluff but I just plain like how good the CRT looks internally when everything is spick and span.

As a demonstration, the following steps were taken to clean the insides of a neat little 37 cm Blaupunkt PM 37-43 television:

Right side
Left side
Model: PM 37-43 / Chassis: FM 241.00 (AKA Grundig CUC 6300)
Requirements:
  1. A dishwasher with a rinse cycle.

    Rinse cycle
  2. Generic washing detergent
  3. Soft bristle toothbrush
  4. Sponge
  5. Magic Eraser (or regional variant)
  6. Philips head screw driver
  7. 8 mm socket
  8. Socket extension
  9. Ratchet
  10. Empty jar
    Tools
  11. Dish drying rack

    Drying rack
  12. Some hot weather!

    The weather in Berlin
I like to cut the Magic Eraser into smaller, more manageable pieces before starting. I do the same with the sponge also:

Sponge and Magic Eraser pieces
Okay, let's get domestic!

Back cover:
  1. Lay the TV face down against protective surface (e.g a hand towel).

    Face down on a towel
  2. Remove the four screws from the back casing.
  3. Place the screws in a small jar for safe keeping. This menial step will save you much angst later on!

    Screws in jar
  4. Remove the back casing.

    Back cover removed
  5. Place the case in the bottom draw of a dishwasher.

    Back cover loaded into dishwasher
  6. Put the dishwasher on a rinse only cycle. Do not complete the full cycle as the intense heat of the drying stage will probably damage the plastic! The plastic used to make TVs isn't the same as the stuff your Tupperware lunch box is molded from.

    Rinse cycle complete
  7. Once the rinse cycle is complete, remove the back casing and place on the sink.

    Bath time!
  8. Check for any stubborn dirt or sticky marks. Clean these with a combination of dish washing detergent and a toothbrush, sponge or Magic Eraser. Use cold water only so as not to damage the plastic. Also, use the toothbrush and Magic Eraser blocks sparingly! They will leave scratch marks if you're not careful! Try to remove grime, dirt or paint marks using the sponge first and then move to a Magic Eraser if it won't budge. Use the smallest piece possible in order to focus on the affected area only and use a light, circular motion for the best effect.

    Detail cleaning
  9. Once satisfied that the case has been thoroughly cleaned, place it back in the dishwasher.
  10. Reset the rinse cycle and run the dishwasher again.
  11. After the second cycle has completed, place the back casing on a dish rack to dry.

    Back cover drying
  12. Once completely dry, wipe down any residual water marks.
Chassis:
  1. Disconnect the two green ribbon cables from the neck board and the main chassis. Place them in the top rack of the dishwasher.

    RGB ribbon cable
    Ribbon cable 2
  2. Disconnect and remove speaker cable. Place it on the top shelf of the dishwasher.

    Speaker cable
  3. Disconnect the white plug for the deflection cable that attaches to the yoke.

    Deflection cable
  4. Un-clip the neck board ground cable from the ground strap attached to the tube.

    Ground wire and ground strap
  5. Disconnect the anode cap (be careful to properly discharge the screen in the process).

    Anode cap
  6. Once the red flyback cable has been removed, unscrew the plastic lugs on the flyback.

    Flyback terminals
  7. Remove the red (screen) and blue (focus) wires from the flyback. Take note of which holes they belong to!
  8. Now, carefully remove the neck board from the tube. To do this safely, hold the front of the TV with one hand and carefully loosen the neckboard with the other hand. Place it on the top shelf of the dishwasher once removed.

    Neckboard
  9. Detach the grey and black degauss cable.

    Degauss cable
  10. Carefully slide the chassis out of the plastic case.
  11. Detach the green ribbon cable from the front remote board (i.e. the front panel control buttons).

    Remote board cable
  12. Detach the plastic guard that protects the mains section. Place this in the top shelf of the dishwasher.

    Plastic cage
  13. Any stickers attached to the chassis will probably come off during the wash cycle. Note down any important details (e.g. flyback model number).

    Grundig M*29201-028.53* flyback
  14. Now, place the main chassis in the bottom shelf of the dishwasher, facing down.

    Chassis, ready to wash!
  15. Complete one rinse cycle.
  16. Remove the each component and spot clean with a toothbrush, sponge or Magic Eraser.
  17. Pay particular attention the anode cable. The cap is usually very dirty (use a toothbrush here) and the red cable is usually filthy (use a Magic Eraser here).
  18. As you clean each component, place it back in the dishwasher.
  19. Complete the second cycle.
  20. Place all parts on a drying rack.

    Chassis and neckboard parts drying
Tube:
  1. Remove the speaker from the side slot inside the case.

    Single speaker
  2. Using the 8 mm socket, unscrew the bolts that fasten the tube to the case.

    Fastening bolt
    1. Put the bolts in the same jar as the four black screws.
    2. Carefully lift the tube out of the case.

      Tube (with degauss cable still fitted)
    3. Remove the degauss cable. Place it on the top shelf of the dishwasher.

      Tube (with degauss cable removed)
    4. Remove the ground strap.
    5. Place the degauss cable and ground strap in the top shelf of the dishwasher.
    6. Photograph any details on stickers that may be needed for later.

      Orion R370BV1BK1A-TC23
      A34JLL90X23
      A 34 JLL 90X23
    7. Carefully place the tube in the bottom shelf of the dishwasher.

      Tube loaded into dishwasher
    8. Complete the first rinse cycle.
    9. Clean the degauss cable with a toothbrush.
    10. Wipe down the tube with a sponge. Do not scrub off the grey aquadag painted onto the tube! That is essential for proper and safe operation.

      Carefully sponging the tube
    11. Use a Magic Eraser to thoroughly clean the glass face and edges of the tube.
    12. Place the degauss cable and tube back into the dishwasher.
    13. Complete the second rinse.
    14. Place the tube face down on a towel to dry.

      Tube drying on a towel
    Front case:
    1. Detach the green ribbon cable from the remote board.
    2. Unscrew the remote board.

      Remote board
      1. Place the front case in the bottom shelf of the dishwasher.
      2. Complete a rinse cycle.
      3. Spot clean any particularly dirty parts. Use a sponge to wipe out the inside of the casing.
      4. Rinse again.
      5. Place on drying rack.

        Front case drying
        Reassemble:
        1. Wait for all components to be bone dry!
        2. Re-assemble the television by reversing the steps.
        3. Pay special attention to the alignment of the tube in the front casing before screwing it into place.
        4. Double check all connections!

          Everything reconnected
          Ready for testing!
        Testing:
        1. Connect the TV to a power strip that has individually switched outlets. This way if something goes wrong you can quickly cut the power without having to go near the TV itself.
        2. Power up the television and hope for the best!

          Success! We have snow...
          All is well with an RGB source
          Close up
        Finished!

        Now, that the operation is complete, let's look back to how dirty this unit was to start with:

        Chassis
        Flyback
        Yoke
        And now compare the end result:

        Chassis and yoke
        Flyback
        Final thoughts...

        I understand that this process was fairly naive. There is a chance of ruining your TV or zapping yourself if you are careful.

        That said, it was interesting to see how a TV could be cleaned so thoroughly using a bunch of household products. The final result certainly looks great and the TV no longer smells like old cigarette smoke and dog fur.

        This process is not really suitable for a larger TV (unless you have access to a commercial dishwasher) but I guess a pressurized water could be handy for a bigger unit.

        Next time I'd like to try to over drying method described here.

        Monday, 7 July 2014

        Build it! Snap it! Zap it!

        My lovely girlfriend bought me this at a garage sale in Melbourne. So cool...

        SmartLab TV Remote Control
        Basically it's a "build your own remote control" kit for kids. It includes all the parts needed to build your own universal remote and also includes a picture book explaining how infrared remotes work. I actually learnt quite a few things reading through that... kinda embarrassing!

        But, best of all, check out that dog!

        Distractions...

        In the midst of packing up my apartment in Melbourne back in January and February, I found plenty of distractions...

        One major black hole for time came in the form of a huge haul of computer hardware from a friend's workplace. The business he works for was moving premises and a whole bunch of outdated but still great gear was on offer.

        Of course, being a scavenger at heart, I couldn't resist! I ended up with a huge pile of Lenovo desktops, a couple Lenovo laptops and shit load of cables, PCI cards and odd accessories. Pretty soon I was asking myself "why did I say yes to this?"

        Big mess!
        A boot load of PC cases en route to the recycle center
        VGA cables for the next 10 years
        After going nuts trying to sort through it all, I managed to make some pocket money selling some of the ThinkCenters on eBay. I also gave boxes full of LAN cables and other miscellaneous gadgets away on Gumtree.

        I gutted the generic PCs and dumped the cases. They were all pretty battered and were also ugly to start with. The nice thing about Clifton Hill was the electronics recycling center just down the road. In my early SCART hunting days I had to pay $25 a pop to dump stuff! Crazy! If I'd known there was free option I would have driven across town from Brighton to make the drop. The cost of getting rid of a CRT was always a deterrent from grabbing that next unit. I really have to find a recycle center here in Berlin if I want to make the most of my new SCART hunting ground...

        In the end, I guess mission paid off in the form of a couple fully working laptops and, most importantly, a bunch of quad core, small form factor machines for MAME use. The ThinkCenters are a neat size for installing inside an arcade cab or sitting under a TV (just like a old VCR or game console).

        It'll be a while before I get home to all the cool stuff that I scored... but it's nice to know that when I get back from Germany there's a sweet retrogaming rig awaiting me.

        Sunday, 6 July 2014

        Road trip and my first Kiwi Thomson

        So, let me start retracing 2014...

        After flying from Melbourne to Auckland back in March, my girlfriend and I took a road trip down the East coast of the North Island of New Zealand.

        We stayed in a quiet (but pretty) little town called Thames on our first night. When we went to the local shopping center the next day to find Band Aids I was pretty impressed to see a proper, old school '90s arcade in the mall:

        Two out of three "out of order"
        More "out of order" shame
        Some "theme park" rides
        Obviously I was disheartened to see so many of the games marked "out of order". Plus, I've never been much of a fan of sit down, mechanical games (although a sit down version of Chase HQ would still excite me). Also, the fluorescent lights aren't so great for atmosphere...

        In general, New Zealand still has far more arcades and takeaway shops with coin ops than Australia. That said, you rarely see a really special game and most cabs are some kind of generic Low Boy style that a Kiwi company must have churned out back in the day.

        Mind you, I certainly enjoyed pumping Metal Slug 3 full of change at the Picton Top Ten Holiday Park:

        Metal Slug 3
        So hard to get in focus without a Pause button
        Woah! Check out that convergence!
        Metal Slug 3 is a great game and it really shows off what is possible with a low resolution display when some some great animators are on the job.

        Also, this machine reminded me of why I persist with consumer SCART televisions... that horrendous convergence in the last picture is unlike anything I have seen on a high end SCART TV. In general, most arcade monitors I come across look pretty ratty compared with a nice, well kept consumer TV.

        Oh, the Picton camp ground also had a pretty sweet Cruis'n USA machine too:

        Cruis'n USA
        When we stopped for lunch in Mount Maunganui (awesome part of the world), we checked out the local op shop and I hit the jackpot: a sweet little 37 cm Thomson SCART television!

        No, THANK YOU Jack!
        I felt pretty good about handing over my $20 NZD since The Salvos had obviously fired up the baby CRT to check that it worked:

        Money to charity...
        Test tag
        We carted this TV around in the back of a camper van for a whole week. I'd be lying if said it wasn't a pain in the ass to have it in tow (it had to live on the driver seat at night when we wanted to sleep in the back), but it paid off in the end! I couldn't wait until we got home to Dunedin so I fired it up at the camp ground in Mapau:

        Who said camping and retrogaming don't mix?!
        Another "artists's impression"...
        The other campers were pretty curious as to why I had a laptop setup on the microwave and and old school TV sitting on top of the fridge. I was happy though. That little Thomson had great focus and stability. A very nice picture indeed! In the coming months I spent plenty of hours playing Ghouls'N Ghosts and probably even more hours playing Luftrausers during my stay in Dunedin:

        My ramshackle Dunedin setup!
        For future reference, this Thomson chassis is highly worthy. It will sync to all manner of video modes and has a nice "blue screen" feature for signals out of range:

        Type: 436/TX807C EU
        Did you notice that Thomson was "Made in Thailand"? Yeah, they don't really use SCART televisions there, but they were still selling CRTs at the general store on the island of Koh Tao:

        Anyone like a TCL with your six pack of Singha?
        Lastly, while on the subject of Thailand, I also saw this super-cute green machine at a Bangkok market. It wasn't for sale... but if it had a SCART port I would have bartered hard for that one:

        Just off the very hectic Koh San Road...
        So cool...
        I love how much of the tube is exposed! I'm not a fan of plastic bezels that surround the tube on arcade cabinets. I much prefer to see the black border of the actual tube. Not many TVs are designed this way but I reckon it's a great look.

        Anyway, that takes care of some of the back log... more will follow soon.

        Friday, 4 July 2014

        Woah! Where did the first half of 2014 go?!

        A girlfriend's perspective of retrogaming?!

        Guten tag! SCART Hunter here... logging in from Berlin!

        Things are about to heat up around here after a busy year of adventure and major distraction from this blog.

        Since I last checked in I moved country (Melbourne, Australia to Dunedin, New Zealand), hung out in Bangkok, Thailand and have now arrived in Berlin, Germany... and (drum roll) I can safely say it's SCART hunting paradise here!!!

        I've got three months in Berlin with limited budget and German skills. Also, no car is a problem when you want to venture out and score a big fat A66EAK tube. Despite these challenges, it would be crazy if I came all this way and failed to indulge in the amazing array of CRTs available on eBay Kleinanzeigen.

        So, expect to see some tasty treasures here soon! And, in the meantime, I'll be updating on some of the activities I've been up to in 2014...